DB Drive WDX12G2.4 (pair) 1250W EACH

Winning Bid: $170.87

Up for Auction is a pair of DB Drive 12″ Subwoofers. Take your build to the next level with this sweet deal! With $1 no reserve bidding it’s a no brainer!!!! Best of Luck!!!

Item condition: New

Description

The engineers at DB Drive have designed this subwoofer from the ground up to shake the ground up. The double stitched foam surround along with the die-cast aluminum vented basket allow for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.

  • 3.0″ Anodized aluminum high temperature voice coil
  • Non-Pressed paper cone
  • Double stitched foam surround
  • Dual poly-cotton dampeners
  • Die-cast aluminum vented basket
  • Rubber gasket trim ring
  • Large gauge compression terminals
  • Protective magnet cover

PHYSICAL STRUCTURE

Outside Diameter (A) 12.95″ (329mm)
Cutout Diameter (B) 11.34″ (288mm)
Mounting Depth (C) 6.75″ (171mm)
GENERAL SPECIFICATIONS
Structure 12″ (30.48cm) Woofer
Dynamic Power Handling 2500 Watts
Nominal Power Handling 1250 Watts
Impedance Dual 4Ω Voice Coil
PARAMETERS
Resonant Frequency (fs) 41.5Hz
D.C. Voice Coil Resistance (Re) 2 x 3.2Ω
Mechanical Quality Factor (Qms) 3.96
Electrical Quality Factor (Qes) 0.55
Total Quality Factor (Qts) 0.48
Equivalent Air Volume to Cms (Vas) 23 L
Mass of Diaphragm/Coil (Mms) 252.3 g
Force Factor (Bl) 27.7
Sound Pressure Level (SPL) 86.6dB

RECOMMENDED ENCLOSURES

Woofer Cut-out 11.34″ (288mm)
Mounting Depth 7.58″ (192.5mm)
Sealed Box 1.88 ft3 (53.23L)
Vented Box 2.6 ft3 (73.62L)
? Vent Area 20 in2 (129.03 cm2)
? Vent Length 17″ (43.18 cm)
? Tuning 33Hz
Dynamic Power 2500 Watts
Nominal Power 1250 Watts

WIRING CONFIGURATION

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).

4 OHM DVC CONFIGURATION

Additional information

Weight 60 lbs
Dimensions 15 × 15 × 11 in

Reviews

There are no reviews yet.

Be the first to review “DB Drive WDX12G2.4 (pair) 1250W EACH”