Description
The WDX MOTO400/4 4-Channel Class-D Amplifier from DB Drive can be used in a variety of car audio applications ranging from simple coaxial and or component speaker setups to even a speaker and subwoofer set up with the rear channels bridged. Its compact size allows for big power in small spaces. The ACT crossover features both high- and low-pass filters which allow you to tune your system for different applications. The conformal-coated PCB allows you to use the WDX Moto series amplifiers in cars, motorcycles, UTVs, and even marine applications. The 4-gauge direct-connect power terminals will make sure you can get plenty of battery current to your amplifiers for higher efficiency.
DETAILS
- 4 x 150 watts at 4 ohms; 4 x 200 watts at 2 ohms; 2 x 200 watts at 4 ohms bridged; rated at 14.4 volts with working voltage between 12 volts and 15 volts
- Minimum working impedance: 2-ohm stereo or 4-ohm bridged
- Frequency response: 20 Hz to 20 kHz, sensitivity: less than 105 dB
- Class D circuitry
- Conformal PCB coating makes it ideal for motorcycle, UTVs, and marine applications
- Crossover selector with high-pass filter, low-pass filter, and full
- Variable high-pass filter (12 dB slope): 40 Hz to 3 kHz
- Variable low-pass filter (12 dB slope): 40 Hz to 3 kHz
- Low-level input: 6 volts to 0.2 volts
- 4-gauge power wire input
- CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
- Dimensions: 6.65 in. L x 5.32 in. W x 2.46 in. H
- Includes owner’s manual/warranty
SPECIFICATIONS
2.46 Inch (in)
5.32 Inch (in)
6.65 Inch (in)
2.6 Pound (lb)
12X10X4
7 x 9 x 4 in., 3 lbs.
6.65 x 5.32 x 2.46 in., 2.6 lbs.
Electric Hardwired
no wireless technology
RCA Pair
12, 14.4
D
200 Watt (W)
150 Watt (W)
20 Hertz (Hz)
20 Kilohertz (kHz)
Car Audio
105dB
2x200W @ 4ohm, 4x150W @ 4ohm, 4x200W @ 2ohm
4 Channels
