DB LINK NOISE FILTER-NF105 Competition Ground Loop Isolator: Reduces and Eliminates Noise (pair)

Starting bid: $1.00

Retail Price: $29.96
Log in to see your savings, including shipping to you.

Up for auction is a pair of DB Link NF105 Competition ground loop noise filters. If your system whines when you rev the engine, these knock out ground loop noise between your head unit and amp so all you hear is the music. As always, good luck, and happy bidding.

Item condition: New

Time left:

Auction ends: November 30, 2026 8:30 PM
Timezone: America/New_York

Shipping

Log in to see the shipping rate to your address.

Estimated Shipping: $4.50 - $8.75
Non-Continental Estimate: $

*Estimated shipping varies based on customer distance from warehouse

Description

The DB Link NF105 Competition Ground Loop Isolator is the quick fix for one of the most frustrating problems in car audio: engine whine, alternator whine, and buzzing that rides along with your music. This auction is for a pair of brand-new NF105 noise filters, so you have one for each set of RCA signal runs or a spare for your next install.

DB Link NF105 competition ground loop noise filter pair

What the DB Link NF105 Does

When your head unit and amplifier are grounded at different points in the vehicle, a small voltage difference can form between those grounds. That difference shows up as noise on your RCA signal cables, and your amplifier turns it into the high-pitched whine you hear when you rev the engine or turn on accessories. The DB Link NF105 sits in line on the RCA signal path between your source unit and your amplifier and isolates that ground loop, reducing or eliminating the noise so all you hear is the music.

Because it is a passive in-line filter, there is no power wire to run and no settings to adjust. Plug your RCAs in on one side, plug the cables to your amp in on the other, and you are done.

Key Features

  • Competition-series ground loop isolator from DB Link
  • Reduces and eliminates noise caused by ground loops
  • Installs in line between the head unit and amplifier on standard RCA connections
  • No power or remote wire needed
  • Compact housing that tucks behind a dash, under a seat, or near your amp
  • Sold as a pair

When to Use a Ground Loop Noise Filter

A noise filter like the DB Link NF105 is a great tool when you have already checked the basics and still hear whine. Before you install one, it is worth confirming that your amplifier ground is short, tight, and bolted to bare metal, that your RCA cables are routed away from power wires, and that your head unit ground is solid. If the noise is still there after those checks, a ground loop isolator is often the fastest way to clean it up without tearing the install apart.

It is also a handy fix for factory-radio systems, line output converters, and installs where you cannot easily change the grounding layout. Installers keep a few of these in the truck for exactly that reason. If you want the technical background, the ground loop article on Wikipedia explains how these loops form and why isolating them removes the hum.

Installing the DB Link NF105

  1. Turn the system off and locate the RCA cables running from your head unit to your amplifier.
  2. Unplug the RCAs at whichever end is easiest to reach.
  3. Connect the RCA cables to the input side of the noise filter.
  4. Connect the output side of the filter to the amplifier or remaining RCA run.
  5. Secure the filter so it does not rattle, then power up and listen for the difference.

What You Get

You will receive two new DB Link NF105 noise filters, exactly as pictured. Having a pair means you can treat front and rear signal channels separately, run one on a sub amp and one on a component amp, or keep a spare in your toolbox for the next customer car that shows up with a whine. Each unit is new and covered by our 12-month factory-defect warranty, and new, unused items can be returned within 30 days.

Bid With Confidence at 12voltronics

This listing is one of our $1 no-reserve car audio auctions, where you name your own price on new gear. Every auction uses proxy bidding in $1 increments, so you can set your max and let the system bid for you. Browse all of our live car audio auctions, or shop the full 12voltronics store for amplifiers, wiring, and install accessories to finish your build.

Click, Bid, Win with 12voltronics. As always, good luck, and happy bidding.

Never miss a $1 auction!

We don’t spam! Read our privacy policy for more info.

Additional information

Weight 0.9 lbs
Dimensions 8 × 10 × 3 in